Product by Industrial/Use
Products
Wear/Heat Resistance
Ingot
-
- Standard and Designation
-
C. P. Ti, Ti-6Al-4V, Ti-6Al-4V ELI, Ti-6242, Ti-5Al-2.5Sn, Ti-3Al-2.5V, Ti-0.2Pd, Ti-1023, Ti-0.3Mo-0.8Ni
and the Chemical composition according to ASTM, AMS, DMS, JIS Specification respectively.
Finish: as cast or turned
-
- Product Specification
Sheets & Plates
-
- Standard and Designation
-
C.P. Ti, Ti-6Al-4V, Ti-6Al-4V ELI, Ti-6242, Ti-0.3Mo-0.8Ni,Ti-15333, Ti-38644, Ti-3Al-2.5V
and Ti-0.2Pd etc. according to ASTM, AMS, ASME, MIL, DMS and JIS specifications respectively.
-
- Product Specification
-
Bars
-
- Standard and designation
-
C. P. Ti, Ti-6Al-4V, Ti-6AI-4V ELI,Ti-5Al-2.5Sn, Ti-3Al-2.5V, Ti-15333, Ti-38644, Ti6AI-7Nb,Ti-662,
Ti-6242, Ti-1023, Ti-4322, and Ti-0.2Pd etc. according to ASTM, ASME, AMS, MIL specification respectively.
-
- Product Specification
- Dimensions: Diameter 7mm-300mm
Finish: As forged/sand blasted/pickled/machined
Tubes & Pipes
-
- Standard and Designation
-
Gr.1, Gr.2, Gr.3, Gr.9, Gr.11,Gr.12, Gr.16 and Gr.17
according to ASTM B337,ASME SB337, ASME SB338, ASTM B338, ASTM B861
-
- Cold-rolled Tubes and pipes specification
-
- Outside diameter 10-114mm
- Wall-thickness 0.5-5.5mm
- Length O.D. 10-15mm 4,000mm max
O.D. Over 15mm 12,000mm max
Finish: cold rolled and annealed in vacuum Annealing furnace
-
- Extruded pipes specification
-
- Outside diameter 25-210mm
- Wall-thickness 4-30mm
- Length 1000-10000mm
Wires
-
- Standard and Designation
-
ERTi-1, ERTi-2, ERTi-3, ERTi-5, ERTi-5ELI, ERTi-7, ERTi-9,ERTi-9Eli, ERTi-ll, ERTi-12, ERTi-16,
ERTi-17 and ERTi-23 accprding to AWS A5.16 specification.
Diameter of Wire in Coil: 0.5mm~7.0mm
-
- Product Specification
-
Diameter(mm) 1.0~7.0
Finish: cold-drawn, unannealed/annealed
Discs & Rings
-
- Application
-
C. P. Ti, Ti-6AI-4V, Ti-6Al-4V ELI, Ti-6242, Ti-0.3Mo-0.8Ni,Ti-15333, Ti-38644, Ti-3Al-2.5V
and Ti-0.2Pd etc. according to ASTM, ASME, AMS, MIL specification respectively.
Finish: As Forged or machined
-
- Product Specification
- -Forged discs & rings
-Rolled Rings
Strips
-
- Standard and designation
-
Commercially pure titanium (Gr.1, Gr.2, Gr.3, Gr.4) and Ti-0.2Pd etc. according to ASTM, ASME and
AMS specifications respectively
-
- Product Specification
- THK 0.3-4.7mm x W ≤ 1350mm x coil